How to Clear Materials in Tracks of Mobile Crushers?

To automatically clear the materials on both sides of track and ensure the normal work of track, it is necessary to equip the mobile crushing plant with clearing device. As to the distance between steel plates and tracks, it should be controlled at 5mm. Steel plates, welded at the both sides of mobile crushing plant, can automatically clear the materials on tracks.

To eliminate the centrifugal force caused by the waggle of crushing teeth and prolong the service life of bearings, you should use the 380V welder to weld the connecting place between crushing teeth and crushing roller. For the convenience to watch the stacking situation of powdered coke, meshing condition between chains and wheels as well as maintenance situation, you can use the perspex sheet to make the watching window with size about 500mm×1,500mm and inlay it into the shield center.

You should contact with the civil engineers to level the track and ensure the track levelness within the proper scope. As to the oil used to lubricate the bearing of travel mechanism, it should be the oil grease. For every three months, you should use the oil gun to inject oil from the zerk.

You should check whether remarkable damage exists between the crushing teeth and tooth holder. If tooth holder is loosened, you should contact with the bench worker to reinforce it. If materials exist in the track, you should clear them immediately. Through the shield and organic glass, you should watch whether chains and wheels are gotten stuck. Enjoy the discounts on website!