What We Need to Do When Running Vertical Crusher?

To make compound crusher work more and more efficiently, we need to often adjust the distance between two rollers. Distance between two rollers can decide the size of finished products and keep it in the scope from 3mm to 5mm. To make the vertical crusher work in best condition, we need to keep the spring pressure suitable.

Except for the above, we need to adjust the distance between scraper and roller drum. Since scraper is easy to be worn out, we need to often adjust the distance and keep it at the scope from 1mm to 1.5mm. If outer diameter of roller drum is seriously worn out, concave surface will be easy to occur and widen the distance between two rollers.

If this distance is higher than the allowed scope, crushing effect will be seriously influenced. At this time, we can take the turning way. After being repaired by turning, roller drum can still be used if distance is properly adjusted. To lower the cost, sometimes we need to change the worn-out roller drum with a new one.

Looseness of triangle belt has great influence on transmission efficiency. So, the belt tension should be suitable. If working for a certain period, belt will experience the plastic deformation and become loose. If belt is too loose, transmission efficiency will be influenced. Therefore, we need to adjust it immediately.

Tension of every belt should be consistent. It is not allowed to use old belts and new belts together. Click website to see price list of compound crusher.